Technologie Pico
Voici le lien pour télécharger une démonstration gratuite de PICO
Pour plus d’informations techniques, cliquez sur ce lien PICO Automotive Library
PicoScope 4223 Kit PP494
The 2-channel version of the Pico Automotive Diagnostics Kit is an inexpensive car diagnostic tool suitable … en savoir plus
PicoScope 2-channel 4223 PP502
interface et logiciel seulement
Pico automotive oscilloscopes combine the performance and features you would expect from the market leader in PC oscilloscope technology, all in an easy-to-use and affordable package. … en savoir plus
PicoScope 4423 Kit PP495
The 4-Channel Automotive Oscilloscope Kit is the latest Automotive Diagnostics Kit from Pico. … en savoir plus
PicoScope 4-channel 4423 PP503
interface et logiciel
Pico automotive oscilloscopes combine the performance and features you would expect from the market leader in PC oscilloscope technology, all in an easy-to-use and affordable package. … en savoir plus
PicoScope Advanced 4-Channel Kit PP537
Our Advanced Diagnostics Kit is the ultimate in vehicle diagnostics. … suite
A.C.E. Misfire Detective Kit PP337
A.C.E. Misfire Dectective logiciel seulement TA029
The ECM does not always detect misfires so you cannot totally rely on your scan tool.
Did you ever have a PO300 code, misfire but the cylinder not identified? Frustrating? … en savoir plus
Coil-On-Plug Ignition Probe PP357
incluant TA033 BNC-BNC cable
Designed to save you time, effort and money, the Pico Coil-On-Plug Ignition Probe is the fastest way to test both conventional and coil-on-plug secondary ignition systems. … en savoir plus
Differential oscilloscope probe TA057
The TA057 is a CAT III rated differential oscilloscope probe that can measure up to ±1400 volts. … en savoir plus
CAN-Bus Test Box PP619
The CAN Test Box is a diagnostic tool which connects to a vehicle with OBDII connector and lets you easily diagnose electrical faults … en savoir plus
WPS500X Automotive Pressure Transducer PP652
autres options disponibles
With the uncompromising resolution and accuracy of the Pico WPS500X Automotive Pressure Transducer you can perform … en savoir plus
Mixmaster 12-Channel Automotive Signal Mixer PP361
With the Mixmaster 12–channel automotive signal mixer you can view an ignition parade display of up to 12 cylinders on any lab scope. … en savoir plus
ACCESSOIRES DISPONIBLES
Secondary Ignition Pickup PP178
The secondary ignition pickup enables the PicoScope to measure high-tension (HT) voltages in secondary ignition circuits. It clips onto the HT lead with no need to disconnect the lead. The lead includes a groupd clip that you must always connect to battery negative (earth) to prevent stray voltages from damaging the PicoScope.
Coil-On-Plug probe extension leads PP399
PP400: ensemble de 4
These extension leads give access to the HT (secondary) ignition circuit in coil-on-plug engines. Fit the COP Extension Lead between the coil and the plug, then place a PP178 Secondary Ignition Pickup on the lead to pick up the HT patter on your PicoScope. Includes en earth (ground) wire to ensure safety.
Inductive Pickup TA032
Detects currents in injector wires, providing a cylinder ID signal for the ACE Misfire Detective software.
BNC to 4 mm Test Lead
TA000: 3 m test lead TA020: 5 m test lead
Custom-made for automotive diagnostics. 3 m and 5 m long versions available. Fully screened to reduce noise pickup.
Multimeter probes TA001 and TA002
These probes fit all our BNC-to-4 mm test cables. They are used to make contact with exposed wires and terminals.
Small crocodile clips TA003 and TA004
These clips fit all our BNC-to-4 mm test cables. They are used to make contact with exposed wires and terminals. For larger terminals, use the TA005 and TA006 large crocodile clips.
Large Dolphin Clips TA005 and TA006
These clips fit all our BNC-to-4 mm test cables. They are used to make contact with exposed wires and terminals, including battery terminals. For smaller terminals, use the TA003 and TA004 small crocodile clips.
Insulation Piercing Clips TA007 and TA008
When there is no other way to get to a wire, clamp one of these on and a sharp pin pierces the insulation. Accepts 4 mm plugs.
2-pin Breakout Lead TA012
For standard 2-pin sensors and actuators. With 4 mm plugs to connect to PicoScope test leads.
4 mm Shrouded to Unshrouded Adaptors TA016 and TA017
Converts the shrouded 4 mm (banana) plug on our test leads to an unshrouded plug for use with vehicle manufacturers’ breakout boxes.
Sprung Hook Probes TA089 and TA090
These probes fit all our BNC-to-4 mm test cables. They allow you to make hands-free contact with exposed wires and terminals.
Premium Test Leads
TA125: Premium test lead BNC to 4 mm BLUE (fixed ground)
TA126: Premium test lead BNC to 4 mm RED (removable ground)
TA127: Premium test lead BNC to 4 mm GREEN (removable ground)
TA128: Premium test lead BNC to 4 mm YELLOW (removable ground)
PP718: Set of four premium test leads (one of each)
60MHz Oscilloscope Probe MI007
This 60 MHz oscilloscope probe is used for acurately measuring fast signals like CAN bus and FlexRay. Standard BNC plug 1,2 m long.
BNC Plug to 4 mm Adaptor MI078
This handy adapter converts a BNC input to two 4 mm sockets, enabling you to plug accessories equipped with 4 mm plugs into the PicoScope.
20:1 Attenuator PP198
Increases the input range to 300 V. For measuring fuel injector and primary ignition voltages.
6-Way Universal Breakout Leads
PP609: Micro 0,6 mm PP324: Small 1,5 mm
PP325: Medium 2,3 mm PP326: Large 2,8 mm
PP327: Breakout lead kit including Small, Medium and Large
No need to pierce insulation or back-pin connectors. Fully shrouded and insulated for safety. These breakout leads simply connect into the existing cable loom and enable voltage readings to be taken from numerous sensors in the engine compartment.
Fuse Extension Leads PP408
ATS and mini-ATS sizes for all common fuses. Use with the 60 amp clamp to measure fuse current.
Vacuum Hose TA085
This hose allors you to connect to the intake manifold for vacuum testing.
Bleed Hose TA086
Fits on the PP652 WPS500X pressure transfucer’s bleed port, allowing you to drain off fuel or oil cleanly.
Exhaust Adaptor TA087
Insert this hose into the tailpipe to detect engine misfires.
Fuel Hose with Large Schrader Valve
TA083: Large Schrader Valve TA117: Small Schrader Valve
PP794: Set of one TA083 and one TA117
Enables connection to fuel systems with WPS500X.
High Strength Compression Hoses
TA088: 14 mm compression hose
TA103: 10 mm compression hose
TA104: 18 mm compression hose
TA105: Ford Triton compression hose
These hoses allow the WPS500X to take the place of a compression gauge..
Brass Adaptor TA129
To use with the TA085 vacuum hose as a step down into different size hoses.
S-Hook MI168
Use this S-hook to keep test leads tidy in the engine bay.
Protective Rubber Case PP691
MI254: Replacement hanging bracket
A rubber case to protect your PicoScope from accidental damage. The boot incorporates a hanging bracket allowing you to hag your scope under the hood.